|
UV Radiometers
|
|
EIT UV Power Map and UV Map Plus
EIT Microcure
EIT Power Puck Flash
|
3D Cure
|
EIT Uvicure Plus II and UV Power Puck II
EIT Spotcure
EIT Palm Probe
|
|
UV Spectroradiometers
Constant Monitoring
|
|
|
|
Uvicure Plus II and UV Power Puck II
|
|
|
Uvicure Plus II and UV Power Puck II are small, portable, self-contained radiometers that measure UV peak irradiance (Watts/cm²) and energy
density (J/cm²) in UV curing applications. The single bandwidth unit (Uvicure Plus II) and the 4 bandwidth unit (UV Power Puck II) help establish UV levels for proper curing of inks,
adhesives, solder masks and epoxies. Units are available in low, mid and high range versions, and also available in a 395 LED monitoring band.
|
UV Power Puck® FLASH
|
|
|
UV Power Puck FLASH is a small, portable, self-contained 4-UV bandwidth radiometer that measures the energy density (J/cm²) of pulsed
systems that pulse in the 100-120 pulse per second range.
|
UV PowerMAP® and UV MAP Plus®
|
|
|
These profiling and temperature measurement systems travel through a UV system and collect data on peak irradiance (W/cm²) and energy
density
(J/cm²) as well as temperature. The collected information is viewed with PowerView® software in graphic or tabular format and can be archived for historical purposes.
Profiling radiometers allow the user to “see” exactly what is happening at every instant of travel through the UV system. The PowerMAP can collect data on 4 different
bandwidths; UV MAP Plus collects data on one standard bandwidth.
|
|
Microcure
|
|
|
MicroCure Miniature radiometer is an extremely small profile radiometer, both in diameter and height. This small size allows it to be placed in
tight areas and to work well for small container curing (cans, tubes, bottles). MicroCure gathers peak irradiance (W/cm²) and energy density (J/cm²) values which are then displayed on a
small stand-alone DataReader. MicroCure is a disposable unit. After 200 readings or approximately one year (whichever comes first), replace your MicroCure with a fresh unit.
|
|
Spotcure
|
|
|
SpotCure UV Intensity monitor is a hand-held UV radiometer used to measure the output of spot-curing systems to determine light guide
degradation. Â SpotCure's measurement head accommodates light guides of various sizes. Â The unit displays the peak irradiance in W/cm².
|
|
Palm Probe
|
|
|
This probe-type, wide dynamic ranged instrument measures peak irradiance (W/cm²) and energy density (J/cm²) in UV curing systems where
measurement space is limited or readings can be difficult to obtain with other types of radiometers. To accurately compare readings on a day-to-day basis, use with a PALM Probe Locator Kit - a
machine mounted accessory that allows insertion at the exact same position under the lamp every time.
|
|
3DCure
|
|
|
3DCure is a unique system for measuring the energy density (J/cm²) and peak irradiance (W/cm²) accurately on large and/or multi-dimensional
objects. Up to 32 sensors in any combination of UV bandwidths can be daisy-chained together and placed on every exposure surface in order to feed information back from up to 32 varied
measurement points. Data is transferred to you PC via Cure_3D® software. Information can then be exported to a spreadsheet to allow analysis.
|
|
|
|
|
|
Jenton International UK
9/10 Ardglen Industrial Estate, Evingar Road, Whitchurch, HAMPSHIRE RG28
7BB
UNITED KINGDOM
Tel:+44 (0)1256 892194 Fax:+44 (0)1256 896486
|
|
|
|
HOME | ENQUIRIES | FIND US | NEWS | EVENTS
UV Curing/Drying Systems Spot Curing Systems Radiometers UV Adhesives Spectroradiometers UV Monitoring Microwave UV Curing
UV(Curing)Conveyors/Ovens Custom Engineering UV Air Sanitisation UV LED Curing Products
|
|
|
|
 www.gentec.be
 www.gentec.be
 www.igb-tech.de
|
