JENTON UV
. Home Products Events Enquiry Contact Blog
+44 (0)1256 892194
Viscosity Control
V
Viscosity Control
Polybag / Bag Machine Attachments
The OmniCure® S1500 provides assembly manufactures with ultimate control, reliability, and high intensity irradiance in an extremely cost-effective and easy-to-use UV spot curing system. Offering precise control of UV lamp output and high-speed shutter activation capabilities, the OmniCure® S1500 UV spot curing system is ideal for the high-volume UV adhesive curing and automated manufacturing processes in microelectronic and optoelectronic manufacturing.
The OmniCure® S2000 UV Spot Curing System is the most intelligent UV adhesive curing system of its kind for UV assembly manufacturing processes. Innovatively engineered with exceptional control features and optimum power capabilities, the OmniCure® S2000 offers ultimate precision and repeatability for highest quality in both automated and manual adhesive curing applications.
UV LED Light Meter with sensor and fine aperture with precise calibration ensuring accurate and consistent measurements over a broad dynamic range
The new UV Spot Curing Radiometer OmniCure® R2000  can be combined with the OmniCure® S2000 Spot Curing System to provide a complete curing station with unmatched control and repeatability. Special electronics built into the OmniCure® R2000 Radiometer allow for connection of custom sensors for measuring light energy directly at the cure site
Wireless and/or Serial Communication with the OmniCure® Series 2000 Set irradiance levels and calibrate the system from a single reference point. Proprietary detector system for accurate wideband measurements. Suitable for use with many different systems Light Guide detector and color coded adaptors. Automatically identifies Light Guide diameter Memory for storing data Download readings to a PC for accurate process documentation Ready to use with additional custom sensors such as the Cure Ring Radiometer
The OmniCure® LED Light Meter, ergonomically designed, with sensor and a fine aperture with a precise calibration, helps ensure accurate and consistent measurements over a broad dynamic range, from an OmniCure® UV LED spot curing system, or any other LED UV source. Power and irradiance can be measured by selecting a specific wavelength on the meter that corresponds to the wavelength of the LED UV source. This enables manufacturers to achieve greater accuracy with ease of use while maintaining reliable and controlled UV assembly processes.
UV LED Light Meter OmniCure®
Can be easily adapted in a fixture or restricted space Accurate irradiance/power measurements Ability to measure from wide variety of LED light sources Detects peak measurement and records the value Traceability for QA process
The LX180 achieves superior UV bonding with faster, more efficient curing through high power UV output with a maximum irradiance of 12,400  mW/cm. The LX180 is simple to use with pre-set exposure times and can  easily adapt to specific uv spotvcuring time requirements for use with a variety of UV Adhesives through its learning mode
OmniCure® S2000
OmniCure® S1500
UV Spot Curing Radiometer OmniCure® R2000
LX180 UV LED Spot Curing
The LX400+ offers the ability to control up to four UV LED Heads simultaneously or independently at different wavelengths: 365nm, 385nm and 400nm. The availability of different wavelengths addresses the requirements of a wide range of UV cured bonding adhesives. Includes ready to use timer, power level and head temperature display modes, as well as a durable and reliable “Start/Stop” activation button in addition to OmniCure® patented Intelli-Lamp® technology that monitors the temperature and operating hours of the UV LED heads to optimize a lifetime guarantee of 10,000 hours of operation or three years, whichever comes first.
UV LED Head Temperature on Display 2 Additional Foot Pedal Channel Control Configurations: FP5 & FP6 Channels 1 & 2 vs 3 & 4 simultaneously Sequential Exposure of Channels 1, 2, 3, and 4
NEW Features:
Jenton International UK 9/10 Ardglen Industrial Estate, Evingar Road, Whitchurch, HAMPSHIRE  RG28 7BB  UNITED KINGDOM Tel:+44 (0)1256 892194            Fax:+44 (0)1256 896486               sales@jenton.co.uk
Jenton International is a part of the Jenton Group of companies specialising in the supply and support of technically innovative products for the Packaging, Banding, UV Curing, UV LED, UV Disinfection, Viscosity Control & Converting industries as well as the food automation packaging industry with Jenton-Ariana 
  JENTON UV
Capability in UV Curing, UV Spot Curing, UV LED Curing

NEW 200W lamp technology with up to 30W/cm² output, 2000 hour lamp life guarantee

Intelli-Lamp® Technology to cool lamp and monitor lamp hours

2 Lamp Options

Closed-Loop Feedback Technology

External PC Controlled

Adjustable light output in 1% increments

Easily combined with the R2000 Radiometer

Fast Shutter Activation Time Modified PLC Level 200W UV lamp technology with2000 hour lamp life guarantee Patented Intelli-Lamp® Technology to cool lamp and monitor lamp hours  Adjustable light output in 1% increments  External PC Controlled
Faster curing through high UV LED output with maximum irradiance of 12,400 mW/cm2 Maximum flexibility and ease of use delivered in a small compact size Higher process efficiency Quick set-up times via remote control and configuration adjustments Increased productivity, minimal downtime through network-enabled remote monitoring Reduced operational costs with instant On/Off and low power consumption High yields via low temperature curing
LX400 UV LED Spot Curing 
UV LED Spot Curing controls up to four UV LED Heads at different wavelengths
UV Spot Curing OmniCure® Systems from Excelitas Technologies, provide precision UV spot curing and advanced LED UV curing systems, to spot cure UV adhesives, coatings and encapsulants in small area UV assembly applications, in  fields such as medical devices, optoelectronics, electronics, fibre optics and digital printing, delivering fast, consistent, and repeatable UV curing results,
The Worlds Most Advanced UV LED Spot Cure System Is Now Available. The new LX500 LED spot cure system is available as 2 or 4 channel version and offers control and power that puts it head and shoulders above the rest. The only LED spot cure system with a closed loop feedback system to calibrate each LED head to a recognized NIST standard makes it ideal for Medical Device manufacturing. A choice of 3 wavelength heads, 365nm, 385nm and 400nm are available.
LED spot cure system with a closed loop feedback system to calibrate each LED head to a recognized NIST standard
LX500 UV LED Spot Curing 
Outstanding optical stability via Intelli-Lamp LED technology Exceptionally high peak irradiance for increased curing efficiency Calibration utility to maintain long term stabilityof UV light Unparalleled process control with StepCure® 2.0 Programming and data logging in real time via a Micro SD
UV LED spot curing bonding superior fast efficient curing through high power UV output with a maximum irradiance of 12,400  mW/cm UV spot curing system ideal for high-volume UV adhesive spot curing and automated manufacturing processes in microelectronic and optoelectronic manufacturing. UV spot curing system for UV adhesive assembly manufacturing processes

 OmniCure® UV Spot Curing Systems & UV LED Spot Curing Systems 

Omnicure UV Spot Curing systems family of products from Excelitas Teacnologies UV Spot Curing System providing complete curing station with unmatched control and repeatability
V
The OmniCure® S1500 for assembly manufactures with ultimate control, reliability, and high intensity irradiance in a cost-effective and easy-to-use spot UV curing system. Offering precise control of UV lamp output and high- speed shutter activation, ideal for the high-volume UV adhesive curing and automated processes in micro and optoelectronic manufacturing.
The OmniCure® S2000 UV Spot  Curing System is the most intelligent UV adhesive curing system of its kind for UV assembly manufacturing processes, offering ultimate precision and repeatability for highest quality in both automated and manual adhesive curing applications.
UV LED Light Meter Omnicure
The OmniCure® R2000 Radiometer can be combined with the OmniCure® S2000 Spot Curing System to provide a complete curing station with unmatched control and repeatability. Special electronics built into the OmniCure® R2000 Radiometer allow for connection of custom sensors for measuring light energy directly at the cure site.-
Wireless/Serial Communication with OmniCure® Series 2000 Calibrate multiple systems with preferred irradiance set point Detector systems for accurate wideband measurements. Light Guide detector and color coded adaptors. Automatically identifies Light Guide diameter Download data to PC for accurate process documentation Ready to use with additional custom sensors
The UV LED OmniCure® Light Meter, can measure power and irradiance by selecting a specific wavelength on the meter that corresponds to the wavelength of the UV LED source, enabling manufacturers to achieve greater accuracy with ease of use while maintaining reliable and controlled UV processes. (NIST, NRC Traceable)
UV LED Light Meter OmniCure®
The LX180 achieves superior UV bonding with faster, more efficient curing through high power UV output with a maximum irradiance of 12,400  mW/cm. The LX180 is simple to use with pre-set exposure times and can  easily adapt to specific uv spot curing time requirements for use with a variety of UV Adhesives. 
Faster curing through high UV LED output With maximum irradiance of 12,400 mW/cm2 Flexibility and ease of use delivered in a small compact size Higher process efficiency Quick set-up via remote control and configuration adjustments Increased productivity, minimal downtime Network-enabled remote monitoring Reduced operational costs Instant On/Off and low power consumption High yields via low temperature curing
OmniCure® S2000
OmniCure® S1500
OmniCure® R2000
UV LED Spot Curing LX180
The LX400+ offers the ability to control up to four UV LED Heads simultaneously or independently at different wavelengths: 365nm, 385nm and 400nm, which addresss the requirements of a wide range of UV cured bonding adhesives. Includes ready to use timer, power level and head temperature display modes.
NEW Features:
LX400 UV LED Spot Curing 

NEW 200W lamp technology with up to 30W/cm² output

2000 hour lamp life guarantee

Intelli-Lamp® Technology to cool lamp & monitor lamp hours

2 Lamp Options

Closed-Loop Feedback Technology

External PC Controlled

Adjustable light output in 1% increments

Easily combined with the R2000 Radiometer

Fast Shutter Activation Time Modified PLC Level 200W UV lamp technology with2000 hour lamp life guarantee Patented Intelli-Lamp® Technology to cool lamp monitor lamp hours  Adjustable light output in 1% increments  External PC Controlled

UV LED Spot Curing Systems 

Accurate measurement positioning beam on detector aperture Easy to use alignment and setup Reduction in calibration time & cost Eliminates need for expensive and bulky alignment tools
· High irradiance at different wavelengths:       9,500mW/cm    (typical) at 365nm        12,400mW/cm  (typical) at 385nm       9,000mW/cm    (typical) at 400nm Full Control of up to four UV LED heads simultaneously Repeatability in UV curing processes for consistent results Highly efficient UV LED heads with extra cooling UV LED head temperature on display in real time “Start/Stop” activation button
  JENTON UV
. UV LED Spot Curing controls up to four UV LED Heads at different wavelengths
Capability in UV Curing, UV Spot Curing, UV LED Curing
Menu
These  OmniCure® UV Spot Curing Systems from Excelitas Technologies, provide precision UV spot curing and advanced LED UV curing systems, to spot cure UV adhesives, coatings and encapsulants in small area UV assembly applications, in  fields such as medical devices, optoelectronics, electronics, fibre optics and digital printing, delivering fast,  consistent, and repeatable UV curing results,
The new LX500 LED spot cure system is available as 2 or 4 channel version and offers control and power that puts it head and shoulders above the rest. The only LED spot cure system with a closed loop feedback system to calibrate each LED head to a recognized NIST standard making it ideal for Medical Device manufacturing. A choice of 3 wavelength heads, 365nm, 385nm and 400nm are available.
Outstanding optical stability via Intelli-Lamp LED technology Exceptionally high peak irradiance, increased curing efficiency Calibration utility maintains long term stabilityof UV light Unparalleled process control with StepCure® 2.0 Programming and data logging in real time via a Micro SD
LED spot cure system with a closed loop feedback system to calibrate each LED head to a recognized NIST standard
LX500 UV LED Spot Curing 
The Worlds Most Advanced UV LED Spot Cure System Now Available.
UV LED Spot Curing system achieves superior UV bonding with faster, more efficient curing through high power UV output UV spot curing system ideal for high-volume UV adhesive spot curing and automated manufacturing processes in microelectronic and optoelectronic manufacturing.  UV adhesive curing system for UV assembly manufacturing processes

  UV Spot Curing Systems OmniCure®

Omnicure UV Spot Curing systems family of products from Excelitas Technologies UV Spot Curing Radiometer Omnicure R2000