+44 (0)1256 892194
High Strength UV Adhesive for bonding for glass to metal
General Purpose UV Adhesive, optically clear. Ideal for glass bond
Non-Drip UV Adhesive for larger gaps and vertical applications. Ideal for glass bonding.
Low Viscosity UV Adhesive, ideal for plastic bonding.
Medium Viscosity, plastic bonding.
Medium Viscosity, plastic bonding. excellent adhesion to acrylic.
Flexible for metal and metalized plastics.
UV and Anaerobic Curing. For bonding ceramic coated glass, mirrors, glass and metal.
Permabond UV light curing adhesives are especially noted for exceptional strength and clarity required
in the decorative and art glass industries. Cure speeds for glass and glass to metal bonds
are completely adaptable to suit the needs of the applicaton; cure speeds in a range of 2 to 30 seconds
can be easily achieved. Cure time is dependent on several parameters and can be adjusted by changing
the light intensity or distance of the light from the assembly.The wide range of viscosities available
allows for both manual and automated dispensing of the adhesives
EMCAST, EMI’s core adhesives range of epoxies and other UV Adhesives for Electronics and general adhesive applications. Featuring very low
levels of ionic contamination and exceeding the requirements of NASA Reference Publication 1124 on outgassing. EMI also offers acrylate based
UV cure materials, single and two component thermal cure epoxy adhesives. Customized formulations and packaging are also available.
•
UV and/or thermally curable cationic epoxy formulations
•
UV and/or thermally curable acrylic and urethane formulations
•
Single and two component thermally curable epoxy formulations
•
Water based acrylic emulsions
•
Customized formulations and packaging are also available
EMI supply a complete line of UV Adhesives, epoxies, sealants, encapsulants and Conformal Coatings, as well as room temperature, thermal
and visible light cure uv adhesive systems. With custom formulating, packaging and application services, we can provide solutions for all of
your UV curing adhesive applications.
UV Curing Adhesives and Conformal Coatings for bonding and curing, in print, medical device,
automotive, electronics, aerospace, electrical, optical, metal, glass, and plastic applications, using
UV Lght Curing Processing Equipment and UV LED Curing systems, where fast, precision bonding, curing
and coating is required
Jenton UV supplies UV Spot Curing Lamps, UV Flood Lamps, UV Conveyors and a range of industrial air-
cooled modular Microwave UV Curing and UV Drying systems, available in stand-alone configurations or
integrated into existing assembly lines, all of which are compatible for use with the complete line of UV
Adhesives, coatings, epoxies, resins and activator-cured adhesives, featured below. .
UV LED Curing systems, also supplied, are an alternative to conventional UV curing lamps, overcoming
many of the limitations of these little changed methods. LEDs enable the precision UV Curing of adhesives,
that is just not possible with conventional UV lamps.
UV Light Curing Sealants, Epoxies, Coatings for Precision Bonding
The mCAST product line of UV Adhesives for Medical Devices is unique to the medical market. This exciting chemistry enables
UV cured polymers to have high temperature resistance, extremely low ionic contamination, low outgassing,
minimal shrinkage, superior chemical and moisture resistance, is virtually odorless, contains several UV
cationic expoxies and cure mechanism which exhibits “dark cure” and includes: . .
Low shrinkage, clear UV Adhesives for Photonic and Fiber Optic Assemblies, all OPTOCAST materials are designed for fast, precise bonding of
optical and electronic components. Featuring low stress, optical clarity, minimal shrinkage upon cure, very low coefficient of thermal expansion
(C.T.E.) values, and excellent moisture resistance.
The EMCAST™ 1900 Series of UV curable epoxies represent a new generation of Conformal Coatings; all are 100% solids, contain no solvents
and are curable with long wave ultra violet light. The use of these systems can result in PCB boards and components coated and cured in a
matter of seconds –eliminating the need for extended room temperature, or oven cures. All EMCAST 1900 series products have little or no
odor, exhibit minimal shrinkage and always cure to a tack free surface without special cure conditions or atmospheres. The EMCAST 1900
series contains products with a wide range of properties that can be customized to fit into virtually any coating application or system.
Permabond UV Light Curable Adhesives are single part, solvent-free, cure on demand adhesives,
suitable for a wide range of applications,.which rapidly cure to form excellent bonds to a wide variety of
substrates such as metals, glass and most plastics.
.
UV Adhesives cure during exposure to ultra violet light. UV adhesives contain photoinitiators reactive to specific light wavelengths
that act as catalysts to promote polymerisation reactions between monomers and oligamers in the material. This polymerisation
reaction typically takes place in seconds or less and thus UV curing is often referred to as ‘instant curing’.
Why use UV Curing Adhesives?
•
UV Curing is fast and products can be handled straight away – allowing more efficient use of
jigs or continuous flow in an automated process.
•
UV Curing is on demand (when UV light is activated) and thus there is no time pressure as
there is with two part or air drying materials for difficult to position or alignment
applications. Errors can be corrected / cleaned /reworked without loss of base material.
•
UV Adhesives do not dissolve, melt or weaken the surfaces of the two items to be joined. A
strong chemical bond is formed between the two substrates providing a high strength alternative to other curing methods.
•
UV materials are solvent free and much less energy is required to cure them than heat cure materials. UV curing adhesives are
very stable and chemically resistant.
•
As no diluent is dried off, volume of material cured, stays approximately the same giving an aesthetically pleasing finish and
reducing concerns related to material shrinkage.
JENTON UV
UV Curing Adhesives & Coatings: (EMI Inc.) Products
UV Curing Adhesives: (Permabond) Products
How do UV Curing Adhesives Work?
UV CURING ADHESIVES and COATINGS
9/10 Ardglen Road,
Whitchurch, HAMPSHIRE RG28 7BB
UNITED KINGDOM
Tel:+44 (0)1256 892194
Fax:+44 (0)1256 896486
sales@jenton.co.uk
UV Curing
UV Conveyors
Packaging
Banding
Food Packaging Automation
UV LED
UV Disinfection
Viscosity Control
Converting
Home | UV Curing/Drying | UV Spot Curing | UV Radiometers | UV Adhesives
Microwave UV Curing | UV Conveyors | UV Custom Engineering
Events | Enquiries | Contact
High Strength UV Adhesive for
bonding glass to metal
General Purpose UV Adhesive, optically
clear. Ideal for glass bond
Non-Drip UV Adhesive for larger gaps and
vertical applications. Ideal for glass bonding.
Low Viscosity UV Adhesive, ideal for
plastic bonding.
Medium Viscosity, plastic bonding.
Medium Viscosity, plastic bonding.
excellent adhesion to acrylic.
Flexible for metal and metalized plastics.
UV and Anaerobic Curing. For bonding
ceramic coated glass, mirrors, glass, metal.
UV Curing Adhesives and Conformal
Coatings for bonding and curing, in
print, medical device, automotive,
electronics, aerospace, electrical,
optical, metal, glass, and plastic
applications, using UV Lght Curing
Processing Equipment and UV LED
Curing systems, where fast, precision bonding, curing and
coating is required.
Jenton UV supplies UV Spot Curing Lamps, UV Flood
Lamps, UV Conveyors and a range of industrial air-cooled
modular Microwave UV Curing and UV Drying systems,
available in stand-alone configurations or integrated into
existing assembly lines, all of which are compatible for use
with the complete line of UV adhesives, epoxies, resins, and
activator-cured adhesives, featured below. .
UV LED Curing systems, also supplied, are an alternative to
conventional UV curing lamps, overcoming many of the
limitations of these little changed methods. LEDs enable the
precision UV Curing of adhesives, that is just not possible
with conventional UV lamps.
Permabond UV light curing adhesives are especially noted
for exceptional strength and clarity required in the
decorative and art glass industries. Cure speeds for glass and
glass to metal bonds are completely adaptable to suit the
needs of the applicaton; cure speeds in a range of 2 to 30
seconds can be easily achieved. Cure time is dependent on
several parameters and can be adjusted by changing the
light intensity or distance of the light from the assembly.
The wide range of viscosities available allows for both manual
and automated dispensing of the adhesives
EMI supply a complete line of UV Adhesives, epoxies,
sealants, encapsulants and Conformal Coatings, as well as
room temperature, thermal and visible light cure uv adhesive
systems. With custom formulating, packaging and
application services, we can provide solutions to all of your
UV curing adhesive applications.
UV Light Curing Sealants, Coatings for Precision Bonding
The EMCAST™ 1900 Series of UV curable epoxies represent
a new generation of Conformal Coatings; all are 100%
solids, contain no solvents and are curable with long wave
ultra violet light. The use of these systems can result in PCB
boards and components coated and cured in a matter of
seconds –eliminating the need for extended room
temperature, or oven cures. All EMCAST 1900 series products
have little or no odor, exhibit minimal shrinkage and always
cure to a tack free surface without special cure conditions or
atmospheres. The EMCAST 1900 series contains products with
a wide range of properties that can be customized to fit into
virtually any coating application or system.
Low shrinkage, clear UV Adhesives for Photonic and Fiber
Optic Assemblies, all OPTOCAST materials are designed for
fast, precise bonding of optical and electronic components.
Featuring low stress, optical clarity, minimal shrinkage upon
cure, very low coefficient of thermal expansion (C.T.E.)
values, and excellent moisture resistance.
EMCAST, EMI’s core adhesives range of epoxies and other
UV Adhesives for Electronics and general adhesive
applications. Featuring very low levels of ionic contamination
and exceeding the requirements of NASA Reference
Publication 1124 on outgassing. EMI also offers acrylate based
UV cure materials, single and two component thermal cure
epoxy adhesives. Customized formulations and packaging are
also available.
The mCAST product line of UV
Adhesives for Medical Devices is
unique to the medical market. This
exciting chemistry enables UV cured
polymers to have high temperature
resistance, extremely low ionic
contamination, low outgassing, minimal
shrinkage, superior chemical and moisture resistance, is
virtually odorless, contains several UV cationic expoxies and
cure mechanism which exhibits “dark cure” and includes: . .
Permabond UV Light Curable
Adhesives are single part, solvent-
free, cure on demand adhesives,
suitable for a wide range of
applications,.which rapidly cure to
form excellent bonds to a wide variety
of substrates such as metals, glass and most plastics
•
UV and/or thermally curable cationic epoxy formulations
•
UV and/or thermally curable acrylic
and urethane formulations
•
Single & two component thermally curable
epoxy formulations
•
Water based acrylic emulsions
•
Customized formulations and packaging are also available
UV Adhesives cure during exposure
to ultra violet light. UV adhesives
contain photoinitiators reactive to
specific light wavelengths that act as
catalysts to promote polymerisation
reactions between monomers and
oligamers in the material. This
polymerisation reaction typically takes place in seconds or
less and thus UV curing is often referred to as ‘instant
curing’.
Why use UV Adhesives?
•
UV Curing is fast and products can be handled straight away
– allowing more efficient use of jigs or continuous flow in
an automated process.
•
UV Curing is on demand (when UV light is activated) and
thus there is no time pressure as there is with two part or
air drying materials for difficult to position or alignment
applications. Errors can be corrected / cleaned /reworked
without loss of base material.
•
UV Adhesives do not dissolve, melt or weaken the surfaces
of the two items to be joined. A strong chemical bond is
formed between the two substrates providing a high
strength alternative to other curing methods.
•
UV materials are solvent free and much less energy is
required to cure them than heat cure materials. UV
curing adhesives are very stable and chemically
resistant.
•
As no diluent is dried off, volume of material cured,
stays approximately the same giving an aesthetically
pleasing finish and reducing concerns related to
material shrinkage.
Capability in UV Curing,
UV Spot Curing,
UV LED Curing
UV Adhesives & Coatings: (EMI Inc.) Products’
UV Adhesives: (Permabond) Products
How do UV Adhesives Work?
UV SPOT CURING
UV CURING / DRYING LAMPS
UV CURING ADHESIVES
JENTON UV
UV ADHESIVES
- Enquiry
- About Us
- UV Curing/Drying
- UV Adhesives
- UV Spot Curing
- UV Spot Curing Accessories
- Pulsed UV Light Systems
- Omnicure Systems
- UV Radiometers
- Constant Online UV Monitoring
- Care and Cleaning
- UV Adhesives
- UV Conveyors and Ovens
- Microwave UV Curing
- UV Custom Engineering
- UV LED
- UV Air and Surface Disinfection
- UV Air Purifiers
- Contact